Who buys this stuff?

"Who buys this stuff?" Hillco employees get that question everday. Odd for someone to be standing in our store, presumably to buy something, or with someone who is looking for some nuts or bolts from our product line, but I digress. While Hillco has enjoyed serving customers large and small in lots of industries, our "bread & butter" has been the auto repair or paint and body/restoration shops. My dad, and Hillco's founder, Jack Hill, has been dutifully calling on and supplying much needed fasteners to shops from San Diego to Los Angeles and the Inland Empire since the early 1970s. He's still at it today, and can't wait for tomorrow. Over the years, he developed a program, called Accu-Pak, which serves as a guarantee to never over-fill the hardware bins or assortments found in most shops. You've seen the gray cabinets (sometimes red, blue, or brown) filled with the various nuts, bolts, fittings, or connectors at your local repair garage. Well, unfortunately, some sales reps have taken advantage of a trusting shop owner by filling those drawers to the brim, regardless of the customer's usage. The guys in the shop just sign for it, the sales rep sends a bill to the A/P department and hopes the owner never even catches on. Most owners do catch on, however, as they watch their dollars just like you and I do. This has the negative effect of causing all shop owners to look down upon fastener salesmen, making cold-calling very tough, and, sometimes uncomfortable. So Hillco guarantees never to do that. This program has served us well over the years. We have a very consistent customer base. In some shops we are now dealing with the second generation, as some owner's children have taken over the family business. As Jack says, "We lose more customers to the cemetery than to the competition." So, if you need a saleman to come by and check your bins, please give Hillco a call. If you don't have any bins, or you need a fastener assortment, Hillco has a great selection of professional shop assortments. We are the most trusted and respected name in automotive fasteners in Southern California, since 1976.

Self-Drilling or Self-Tapping?

SELF-DRILLING or SELF-TAPPING? What's the difference? If you are confused, don't worry! You are not alone. Confusing self-drilling and self-tapping screws is probably the single most common terminology error we hear at Hillco Fastener Warehouse. A self-drilling screw has a drill-bit point to help drill into metal without pre-drilling holes. They are also called Tek® screws, a brand name, not to be used to refer to generic screws. However, many people who use fasteners in their daily lives, like many of our customers here at Hillco, have come to call self-drillers Teks screws, the way many people refer to all photo copiers as Xerox machines. A self-tapping screw has a sharp point normally and is a type "A" or "AB" tapping screw -- (though there are variations, such as "B" point which are blunt). A self-tapping screw (sheet metal screw, wood screw, lag bolt) cuts its own thread (like a tap), but there must already be a pre-drilled hole. Self-Drilling screws are for metal only and do not work well in wood (except for specially designed parts with reaming wings). Self-tapping screws work well in all materials, but are likely to need a pilot hole in many applications. Hillco sells both self-drillers and self-tappers in steel and stainless steel. We also sell chrome plated trim screws for interiors that come in both variations. Feel free to call us at 714-657-7442 if you'd like to know more!

Fittings Confusion

If you are anything like me (or most of our customers here at Hillco Fastener Warehouse), then measuring fittings can be very confusing. Heck, all fittings are confusing, if we're talking about the size designations and what they are called. For instance, we had a customer trying to complete the plumbing on an off-road project recently. He came into the fitting area with that glazed look in his eyes, so I could tell that I better drop everything and focus. Here's what he said: "I need a 3/8" fitting to come from the oil pump, but the other end to the pan is 1/2" or so. Also, the fuel pump is 3/8" male, which needs to go to the carb, which is A-N. And I need to install an oil temperature gauge, but it has to be male threads. And I would like to use stainless steel braided hoses if I can afford it. How much is this going to cost?" I quickly discovered that the glazed look in his eyes was contagious, because now I had it, too! So, the first thing I did is what I always do when someone comes in looking for brass or Fragola A-N fittings: I grabbed a pencil and a sheet of paper. I have found that, where fittings are concerned, a picture is worth a thousand words. Just basic diagrams work, so that the customer can point out where he needs a male or female fitting, for example. But where it really gets confusing is if the customer doesn't have a sample of the piece they need to replace. Why? Because, there are many different call-outs regarding thread designations. Bolts are easy. If it's American, and if it fits in the 1/2" hole in the gauge (note: if you don't have a Hillco bolt gauge {HI00001-$4.00}, get one! You will find that it will be one of the most-used tools in your tool box), then it's called a 1/2" bolt. Simple! But I have on my desk in front of me a 1/4" NPT pipe plug, a 1/4" A-N union, a 1/4" flare nut, and a 1/4" compression fitting. And guess what? They are all different, and none measures 1/4"! The pipe fitting measures 1/4" on the ID of the fitting, but about 1/2" on the OD. A compression fitting measures 1/4" on the OD of the tube , but the thread pitch of the fitting is 7/16-24. A flare fitting also measures the OD of the tube, but for a 1/4" flare fitting, the thread pitch is 1/2"-20. And, finally, the thread pitch on a 1/4" A'N fitting measures 7/16"-20. Go figure! So please, next time you're looking for a fitting, have some samples. And please, talk slowly!

Why are steering wheels on the left?

A 1909 Ford sales brochure noted that Ford moved the Model T steering to the left rather than the standard right hand position for cars of that time period. Their reasoning was that it was safer for passengers exiting on the right (curb side) rather than into the traffic lane due to the number of tractors and other agricultural equipment driving on the streets of many farming communities. Ford also noted that the left hand driving position allowed the driver better visibility and better judgment when passing oncoming vehicles. The popularity of the Model T made left hand steering the norm throughout the United States. (In 2009 the Model T turned 100 years of age!)

Avoid Bolt Breakage

A very common problem we face on a regular basis here at Hillco Fastener Warehouse is customers complaining that their bolts "broke." Usually, we hear "You need to replace my bolts. I bought 16 of them and all the heads popped off when I installed them." So, the first thing we have trained our counter men and women to ask is "Ok, I can help you. What kind of bolt was it?" If it's stainless steel, we ask if they used anti-seize. Usually, the answer is no. If that's the case, we then educate them on the need for anti-seize when using stainless steel bolts, sell them some new ones, and off they go, happy to have learned something new. Often times, however, they'll say "I used grade 8 and I barely torqued them at all!" Right...So we pull out a torque-spec sheet (I found a pretty good one here: http://www.raskcycle.com/techtip/webdoc14.html). Usually, they've over-torqued the bolt to the point the head has been stretched right off. It doesn't take much, usually quite a bit less that the customer believes is needed. So get that torque wrench out and follow the specs on your torque sheet, and don't break any more bolts. Now, get back out to the garage and make some noise!

Super Cruise Sunday '11

We look forward to this event every year because it gives us the opportunity to see your projects. It's always a very special day for us, but this year was spectacular. There were 250 street rods, race cars, motorcycles, off-road trucks, and even a golf-cart dragster! We had fantastic weather too, even though it rained almost every day of the week leading up to our event! Thanks to everyone for a wonderful day. A special thank you to Hoist Services, Superior Automotive, Napa Auto Parts Garden Grove, Guzman's Auto Repair and AAA Insurance for their generous door prize donations. We had great door prizes this year thanks to them. A special thanks to Gary Brown of Gary's Woodcraft for emceeing our event. We hope to see all of you at Super Cruise Sunday '12! Check out the photo gallery at www.socalcarculture.com to see some great pictures of this year's show.

Hillco Staff

Hillco Gift Cards

The perfect stocking stuffer.   Hillco Gift cards are now available in any amount.  Minimum is $10.  Not available as an online item.  Call 714 657-7442 to order.

Hillco Staff
Copyright © 2010 Hillco Fastener Warehouse, Inc. All rights reserved.
Wp Theme by Templatesnext . Blogger Template by Anshul